KILLERWAXX XXX SiO2/Graphene Coating 50ml

INTRODUCTORY PRICE

What is Graphene?

"The NEW kid on the block" is here! Graphene is the name for an atom-thick honeycomb sheet of carbon atoms - Harder than diamond yet more elastic than rubber - tougher than steel yet lighter than aluminium.

It's the worlds strongest material and now it's being used in detailing products! 

KILLERWAXX XXX SiO2/Graphene Coating 50ml

This Nano SiO2/Graphene Coating creates a glass like shield to protect your vehicle for up to a year against harmful uva/uvb rays and other elements, including weather erosion, bird droppings, pollen and more.

In addition to protecting your vehicles paintwork, this product creates a brilliant glass like shine that adds depth and clarity to your paintwork restoring colour. It will dramatically reduce how much time and energy you spend maintaining the appearance of your vehicle by making elements like dirt and grime fall right off far easier - more protection equals less washing required!

Features of graphene

• Water-spot prevention and reduction
• Anti-corrosion against winter road salt
• Anti-static
• Chemical resistance below PH 12
• Flexibility
• Hydrophobic
• High slickness
• Wet glossy appearance
• Protection for 1 year+

In the box:

• 1 x 50ml coating
• 1 x Applicator Pad

Directions (Apply by hand).

1. Fully prepare the paintwork prior to application (wash, decontamination and where required, paint correction).
2. Ensure the paintwork is free from any residue, oils from polish/glaze/wax.
3. Apply 6-7 drops of the graphene coating to applicator and work into a section of the paintwork in a criss-cross pattern. Apply the same pressure as you would with a paste wax. Ensure the coating is thin, but evenly covered. 
4. Gently remove the majority of the product. Remember, this is not the final buffing stage. *If you are experiencing humid weather, ensure you start to remove within a minute.
5. With a second new microfibre, dampen it and gently wipe the area you are working on. As before, this is not the final stage.  
6. With a third cloth, now buff the area you are working on to a smear free finish. This should be easy with little pressure required.
7. You can repeat this entire process to further enhance durability and shine but ensure you leave at least 1-2 hours between each coating.