KILLERWAXX XXX SiO2/Graphene Ceramic Coating Spray 235ml
- £14.99
What is Graphene?
"The NEW kid on the block" is here! Graphene is the name for an atom-thick honeycomb sheet of carbon atoms - Harder than diamond yet more elastic than rubber - tougher than steel yet lighter than aluminium.
It's the worlds strongest material and now it's being used in detailing products!
XXX SiO2/Graphene Coating Spray
XXX SiO2/Graphene Coating Sprayis the future in detailing sprays! With phenomenal water-beading abilities, XXX SiO2/Graphene Coating Spray has properties to not only protect against water spotting onto your paintwork, but also road film, dirt and other contaminants are prevented from damaging your paintwork for up to 6 months. *This can be used a stand-alone product or maintenance for you current coating.
When detailing you can spend countless hours designing a perfect look to your vehicle, but you will also need to protect that look with a ‘last step product’ (LSP) that might take longer than you want. XXX SiO2/Graphene Coating Spray is an exception to the rule as you can apply much needed protection, that lasts longer than the life of oil.
What makes XXX SiO2/Graphene Coating Spray so great is the fact that after spraying onto the vehicle and spreading it out evenly, you can feel the paintwork becoming slick or smooth. This process lets you know the car is being protected while leaving a high gloss and makes for an easier wipe-off step.
Just because it is four times faster than a standard doesn’t mean it lacks protection ability. Whether it is road grime, fallout, dirt or whatever else is thrown at your vehicle you can be assured XXX SiO2/Graphene Coating Spray has the same protective abilities as any other LSP. Water spots will never be an issue either as the hydrophobicity in this product is so elegant that water, no matter how hard, will just sheet and bead off!
If you have a coating applied to your vehicle, XXX SiO2/Graphene Coating Spray can be used as a booster to give you the ultimate protection package.
Directions:
The surface needs to be prepped properly and cleaned throughly. Any contamination on the surface can cause the coating to not adhere properly to the surface. Preparation of the surface is usually key to the performance of the product itself.
- Shake well (important).
- Spray a fine mist onto a plush microfibre cloth.
- Wipe over a panel at a time (half for large panels such as bonnet and roof).
- Flip cloth over to a fresh side and buff off for a streak free shine (have a second microfibre to hand for additional buffing if required).
- Repeat on remainder of exterior of vehicle.
Can it be applied on top of other waxes?
Very much so! It bonds extremely well not only to itslef but to other waxes, particularly SiO2 based waxes. It is best used as an LSP rather than underneath a wax.
Please allow at least 1 hour before spraying water onto the newly protected paintwork as the product will take some time to bond and introducing water will dilute this and weaken the coating.
For use as a drying aid:
- After vehicle has been rinsed and still dripping wet, mist each panel, glass and plastics.
- Use a microfibre towel to completely dry vehicle.
NOTE: Best applied in a shaded and cool area. Additionally, if it is too hot, there is a risk of streaking and shadowing may occur. (if this occurs, use the coating again on the affected area and remove straight away or use a damp microfibre towel and wipe over.
Cures fully after 12hrs and layerable after 6hrs.
Features of graphine
- Water-spot prevention and reduction
- Anti-corrosion against winter road salt
- Anti-static
- Chemical resistance below PH 12
- Flexibility
- Hydrophobic
- High slickness
- Wet glossy appearance
Read our article "What is graphine?"
