This Snow Foam Lance Kit provides the kit you require (in conjunction with your own pressure washer) to carry out a very safe pre-wash.
High Quality Italian Brass Snow Foam Lance built to last.
The Snow Foam Lance is now used throughout the world and now with many thousands of enthusiasts and professionals using them they really are the best and safest pre wash foaming tool to have in your collection! The Foam Lance offers a very high level of foaming and delivers this through its high quality Italian brass construction body and stainless steel injector which with its high foaming, durability and ease of use is certainly the most important key factors of the product.
Making it easy to remove when rinsing the car, leaving a cleaner and dirt free surface. The benefits are excellent and really do reduce the risk of creating swirl marks, marring and fine scratches during the hand washing process.
The adjustable foaming tip is made of heavy-duty plastic with a 1Ltr sized bottle coming with markings on the side for yopur convenience. The bottle is made from chemically resistant, high density polyethylene (HDPE). The stainless steel injector head offers highly flexible dilution rate adjustability via a large top mounted control dial with directions engraved. This allows you to fine tune the consistency and thickness of the foam with a turn clockwise producing thicker foam and anti clockwise a thinner foam.
2 Nozzle Screws are provided with this lance and are used dependant on your water flow rate (see below for more details)
Quality connectors for your pressure washer lance are included and come FREE with your Lance.
Features of the Lance:
Max Pressure: ≤110 Bar Power: ≤ 1500w (1.5kw) Flow Rate: ≤7L/min Max Temp: 60°C
Adjustable Chemical Dial with + & - Directions 1 Litre Bottle with markings
Variable Spray Nozzle - from a wide to a pencil jet spray
Solid Brass Manifold construction with strong plastic nozzle
(≤ Less than or equal to)
There are two kinds of nozzle screw jet sizes with this lance, 1.25mm and 1.1mm. Normally, each foam lance is with 1.25mm nozzle screw jet already. You may just need the 1.25mm one for replacement if the previous one is broken for somereason. However, if your pressure washer is with too small pressure or output flow rate, you need this 1.1mm nozzle screw jet on your snow foam lance to produce thicker foam to better washing your vehicle.
Use approx 1" of Snow Foam (or as directed with product) and top up with with warm water tobetween halfway / two thirds up the bottle.
For a stronger mix, turn the top dial as far towards the – sign as it will go and then a tiny bit towards the + sign (just so it’s not on full lock) This provides a less water and more foam mix.
Shake the bottle lightly to mix solution.
Do not let the snow foam dry out on the car bodywork
Avoid putting the pressure jet too close to the paintwork – about 1 metre should be fine
Rinse out your snow foam lance by running through with clean water if you are not using it again for a while. This avoids any blocking of the nozzle or pipe work from dried soap and means you are ready to go next time!
*You will receive an attachment with this Lance from choosing the type from the drop down box
(Please check your Spam/Junk folder for notification and add us to your mailing list)
Thankyou for shopping with The Clay Cloth Company