This product can be used for two purposes. Firstly as a maintenence/reloader for your TENZI Q7 & Q10 ceramic coating, which is applied periodically in line with the directions below. Secondly, it can be used on 'non-ceramic' coated cars extremely effectivly. It enriches and deepens the gloss whilst improving the hydrophobic effect.
Based on advanced silicon-ceramic technology, TENZI SLS has high quality components that provide a “super slip” effect, "anti-static" coating and a long-lasting and durable protection with high hydrophobic qualities.
TENZI SLS prolongs the service life of the Ceramic Quartz Coatings and positively influences their quality and appearance.
Ceramic Coated vehicle paintwork - Apply after approx 2 months from initial application of Q7 & Q10, thereafter every 6 months.
Non Ceramic Coated vehicle paitwork - Apply approx every 4-6 months.
METHOD OF USE
1. Read the product safety data sheet below before using. 2. The product is ready to use without any dilution required. 3. Before using, clean car paint from any impurities like dirt, insects, mineral sediments etc. 4. Once paintwork is clean, apply TENZI SLS on a clean, dry and degreased surface via an applicator pad and evenly spread it with circular movements. 5. Work the TENZI SLS in with an applicator pad or soft cloth in circular movements, ensuring you only use enough just to cover the area you are working on (ideally 60cm x 60cm) 6. Remove before full hazing occurs with a plush microfibre cloth. 7. Automatic hardening (curing) will take about 4 hours. 8. Apply approx every 6 months after initial application for ceramic coated vehicles; recommended every 4-6 months for non ceramic coated vehicles.
(Please check your Spam/Junk folder for notification and add us to your mailing list)
Thankyou for shopping with The Clay Cloth Company