The TENZI Q7 and Q10 Ceramic Coatings provide an extremely effective, professional and permanent shield to your paintwork. They can be used on any vehicle with good condition paintwork and the products are applied in a specific order as detailed below.

TENZI Q7 Crystal Ceramic Quartz

DESCRIPTION

Very effective product, providing perfect appearance and protection of the car paint.
It creates a super-hydrophobic coating that immediately drains the water from the car paint and leaves no water stains.

TENZI guarantee that Q7 will give you a long-lasting and durable protection from atmospheric conditions, dirt settling and mechanical damage. It will emphasis and enrich colour depth.

Based on resin and propolymer Si14O2, TENZI Q7 provides the perfect look and paint protection. Creates a superhydrophobic coating, immediately repelling water from the car body without leaving stains. Q7 is a guarantee of long-lasting and durable protection against moisture, salt, weather conditions and UV rays.

DURATION

Up to 3 years

APPLICATION AREA

Vehicle paintwork

METHOD OF USE

1. Read products safety data sheet below before using.
2. Perform the whole operation in 18-20°C (in dust free and closed room for the best effect).
3. Spread the product on the clean and degreased surface with the applicator and cloth provided one section at a time.
4. Leave it for 3-5 minutes (bonding time)

5. Remove excess product and buff gently with microfibre cloth to a mirror finish.
6. Repeat the application 3 times at intervals of approx. 3 hours (3 layers recommended); after applying the last layer the time of self-hardening is at least 8 hours.

WARNING

Do not use the product in temperature below 10ºC!
Do not expose the surface to sunlight.
Make sure that the surface is not hot.
Provide proper ventilation and fresh air without creating dust in the atmosphere.

SAFETY DATA

Technical cards
Safety Data Sheets

TENZI Q10 Flexi Ceramic Quartz

DESCRIPTION

A Flexible professional product based on oligomer prepolymer Si14O2. Due to its new improved formula, TENZI Q10 provides the perfect look and paint protection. Creates a superhydrophobic coating which thanks to its flexibility is more resistant to damage. TENZI Q10 is a guarantee of long-lasting and durable protection against moisture, salt, weather conditions and UV rays. Enhances the depth and clarity of paintwork creating a mirror finish.

APPLICATION AREA

Vehicle Paintwork

DURABILITY

Up to 3 years

METHOD OF USE

1. Read products safety data sheet below before using.
2. Perform the whole operation in 18-20°C (in dust free and closed room for the best effect).
3. Apply Q10 to clean and free of oil and grease car paint with the applicator pad provided working one section at a time.
4. Leave for approx. 10 minutes (bonding time).
5. Remove excess product and buff lightly with microfibre cloth to a mirror finish.
5. Repeat the application 3 times at intervals of approx. 3 hours (3 layers recommended).
6. After applying the last layer the time of self- hardening is at least 8 hours.

WARNING

Do not use the product in temperature below 10ºC!
Do not expose the surface to sunlight.
Make sure that the surface is not hot.
Provide proper ventilation and fresh air without creating dust in the atmosphere.

SAFETY DATA

Technical cards
Safety Data Sheets

MAINTAINENCE & CARE

The vehicle exterior paintwork must be maintained and washed regularly to prevent contamination build up (ie, fortnightly/monthly).

TENZI Q7 & Q10 is a self cleaning coating, and helps makes cleaning the car very easy. Minimal products and effort is required. All that is required is care!

POST APPLICATION MAINTENANCE

DO NOT WASH THE CAR FOR 7 DAYS AFTER APPLICATION OF Q7 & Q10

Do not be concerned about dust or soiling during this period. Do not wipe the car with dust on it. Use compressed air or an air blower to remove dust, other than that, or in the case of bird droppings, tree sap or any other environmental fallout, use water and wipe off gently & tap dry.

Do not cover the vehicle with a top cover as it may cause scratches.

It is also recommended to try and minimize vehicle usage within this period.

ROUTINE MAINTENANCE

The idea of safely washing your car is to follow a process that minimises the marring damage caused while at the same time ensuring you remove any built up dirt and grime or other loose surface contaminants from all surfaces. This is not just limited to paintwork but also includes trim, windows and other areas.

When carrying out the wash process the overriding goal is not to create further swirl marks within your paintwork. Therefore, if something is going to touch the paint it must be soft and clean and used gently.

SHAMPOO

A good car shampoo has two key characteristics; pH balanced and high lubricity. A pH balanced shampoo is important as it doesn’t strip paint protection you may have in place such as wax. A high lubricity shampoo is important in safe washing as a slippery surface allows dirt and grime to be easily lifted off.

TENZI Ceramic Coating Q7+Q10 50 ml each (FREE Precision Applicators & Suede Microfibres)

TENZI Ceramic Coating Q7+Q10 50 ml each (FREE Precision Applicators & Suede Microfibres)

The TENZI Q7 and Q10 Ceramic Coatings provide an extremely effective, professional and permanent shield to your paintwork. They can be used on any vehicle with good condition paintwork and the products are applied in a specific order as detailed below.

TENZI Q7 Crystal Ceramic Quartz

TENZI Q10 Flexi Ceramic Quartz